Pre-configured kits supplying both projector control and input switching and selection. Available in several flavors providing both traditional analog as well as digital connections.
The SP Controls 7-inch Touchscreen controller provides a simple, affordable and easy to configure solution for presentation systems control. Using a bright, capacitive color display the unit responds instantly with the touch of a finger.
Using the quick and easy set-up and a configurable built-in GUI, makes the SP-TP7 a breeze to get up and running. Install the touchscreen unit with a required SP Controls NRC (Networked Room Controller) into all your presentation system installations. Update existing or older systems to touch control by replacing PixiePro control units in minutes. Seamlessly connects directly with existing or new SP Controls NRC units over standard category cabling or via your secure network.
Varied available mounting solutions for secure wall, equipment rack, tabletop or lectern, as well as legacy updates.
SmartBox+ replacement face-plates will provide a modern and streamlined look for conference and meeting rooms, classrooms, auditorium or multi-purpose presentation systems.
Take advantage of SP Controls’ extensive driver library built from over 20 years of control product development. Remote access, management and control of AV in multiple rooms and buildings over the network is available by running SP Controls SmartView Web software on your system through SP Controls Networked Room Controllers.
Features:
- Beautifully designed with anodized brushed aluminum bezel.
- 10-point touch screen display.
- Control of multiple displays or rooms via single centralized touchscreen control.
- Power Over Ethernet using a single network cable (Optional PoE adapter required).
- Remote management, control, monitoring your AV via SP Controls SmartView Web HTML5 through the NRC (Enterprise Management Software).
- Compatible with current and legacy NRC devices for simple and quick room updates.
- Audible feedback from button presses.
- Full-size HDMI and 3.5mm stereo audio outputs (for future functionality).
- Built-in IR receiver (for future functionality).
- 4 High speed USB 2.0 ports (for future functionality).
-
Energy-saving features:
- Proximity sensor wakes the SP-TP7 when approached, saving energy when inactive.
- Ambient light sensor saves energy by adjusting touch panel’s display when room lighting changes.
- Optional Pro-Mount wall-secures the SP-TP7 to a wall or surface.
- Optional angled desktop/tabletop stand available as well as rack plate and SmartBox+ mounting options.
The PixiePro is a modular, tactile button audiovisual control system with infrared-learning capability.
No programming necessary; uses SP Controls’ proven Pixie technology to learn and replicate commands for almost any IR-controllable device. PixiePro smartly controls up to eight source devices. Optional modular inserts (included) support devices, including DVD and media players, lifts, screens, document cameras, switchers, amplifiers, etc.
The PixiePro can be combined with the Networked Room Controller (PX2-NRC-1142) to expand the system to control serial and relay devices.
Ships with one IR emitter for control of a single IR device. Control of multiple devices requires the purchase of extra IR-only emitters (PXE-EMIT).
Optional access-control security is configurable with up to six-digit PINs.
Automated shutdown timer protects expensive projector bulbs and saves energy.
Illuminated back-lit LED buttons provide visible and audible feedback. Any button can be configured with multiple codes for macros and other common automation tasks.
Full configurations can be copied (“cloned”) between PixiePro units in seconds.
The PixiePro ships ready to surface mount (included), or fits in a four-gang backbox.
The Networked Room Controller is a configurable, low-profile, low-cost, programming-free control system that can be configured, controlled, and monitored via a friendly Web interface. It provides relay, IR, RS-232, and general purpose sense ports. Control may be extended with PixiePro Control Puck peripherals. The PixiePro Modular Panel or SP-TP7 Touch Panel may be used as a front-end user interface.
The standalone NRC Configuration Utility now runs outside of any web browser. At present this requires Windows 10 or earlier. If your browser has trouble with downloading from that link, please see this video for suggested workarounds. Running this utility requires that Java be installed on the same computer. Java can be downloaded and installed directly from Oracle at the Java homepage.
Oracle® and Java are registered trademarks of Oracle and/or its affiliates.
Microsoft® and Windows are trademarks of the Microsoft group of companies.
The SP Controls multi-function Smart Media Box #SLB-SBOX II (SBII) is a plenum-rated 16×16×6″ metal enclosure used to house everything you need for your AV project (up to 20 lbs). The SmartBox II is a flexible, secure and unobtrusive equipment enclosure for customizing your solution. Constructed of high strength steel, the SBII features a sliding slotted tray that securely locks in place, requiring no hardware to secure it.
Key features include:
- Multiple mounting options including ceiling tile, pole mount, wall mount, and under-table mounting.
- Removable equipment tray with slots to accommodate a variety of cable types and power plugs.
- Lockable tray allows both vertical and inverted mounting with no screws.
- Keylock to protect equipment.
Pole Mount
The SP Controls Pole Mount Adapter (SLB-SBOX II POLE MT) allows the SLB-SBOX II to be mounted horizontally on a pole with a diameter of between 3/4” and 2-1/4”. The SLB-SBOX II can be mounted right side up with the lid on top or inverted.
Ceiling Mount
The SP Controls Ceiling Mount Plate (SLB-SBOX II CEILING PLT ) is a 2’ x 2’ metal plate that is mounted in a standard ceiling tile space. The SmartBox II is bolted to the Ceiling Plate, and resides below the ceiling tile for easy access.
Cable Cover
Powdercoated Steel, available in Black or White
The SP-TP7-DSKTP angled tabletop/desktop stand provides a secure elegant mount with a 45-degree angled view of the SP-TP7 control interface. Attractive and removable side panels provide ventilation.
The SP-TP7-WMPRO Secure Wall ProMount allows mounting directly to a flat surface, mud-ring (PX2-MUDRING) or back box and securely lock the SP-TP7 in place.
The PX2-MUDRING is a 4-gang mud-ring which accommodates either the SP-TP7 touch panel and the PixiePro (PX2-MP-IR) button panel.
The SP-TP7-RK is a 3 RU (3 Rack Space) 19″ rack mount panel into which the SP-TP7 fits for use in a standard equipment rack.
The SP-TP7 ships with one 5V Power Supply.
The SP-TP7-POE-5V Power over Ethernet adapter/splitter allows installation of the SP-TP7 using a single Ethernet cable. Ethernet hub or switch must provide 5V power.
The SP-TP7-S4 Power over Ethernet four-port switch provides the required 5V power as well as network signal to the SP-TP7. (This is an unmanaged switch)
The PixiePlus Device Control Module provides a simple, standardized control interface for projectors, monitors or other AV display devices in a compact single-gang form factor. The customizable interface allows for a variety of configurations from one to eight buttons, giving the user the ability to tailor the PixiePlus to the exact requirements of the devices being controlled. This design not only provides a professional looking interface, but allows you to eliminate any un-needed buttons that may confuse the end user.
To expand the already sophisticated PixiePlus for advanced features such as RS232 control, a Programming Wand (sold separately) connects to the PixiePlus through its IR interface. There is no need to remove it from the wall! First, connect the Programming Wand to your PC with USB and an application will automatically launch. Next, specify the codes to be sent for each button to the Programming Wand, disconnect the Wand and take it to the PixiePlus you wish to configure. Point and shoot and presto–you’re done, all without having to carry your PC around!
The PixiePlus learns IR and RS-232 control codes. One PixiePlus can download a complete configuration in mere seconds. PixiePlus can be configured with a user-defined security code to prevent unauthorized use. Energy-saving inactivity shutdown timer based on time since last key press, or using the optional Real Time Clock module, provides battery-backed shutdown timer based on specific time of day and will keep time through power outages. A hybrid approach allows a combination of both.
Accessories for the PixiePro Modular Panel
The AmpLINC HUB is an analog distribution system.The AmpLINC HUB provides both power and audio signal to the AmpLINC amplifier puck over standard Category cabling allowing for scalable audio in any application. Daisy-chain architecture allows multiple AmpLINC amplifier pucks on a single CAT5/6 run. Level control can be preset prior to amplification.
The AmpLINC Amp10 PUC is an efficient remote amplifier device that connects to any 8 or 4 ohm speaker over CAT5/6 cabling to enable that speaker to be amplified at the speaker. The Amp 10 can be tapped from 10 watts down to 0.3 watts and daisy chained to scale from 1 to 60 per application. The Amp 10 can be set up as a right, left or mono channel speaker via dip switches on the Amp 10. The Amp 10 PUC receives both power and audio signal over standard Category cabling from the AmpLINC HUB.
Compact 2-input 40watt mono (bridged) or 20watt stereo per-channel amplifier with RS-232 control.
Accessories for the Pixie+ Display Control Module. New pre-configuration and pre-wiring services available!
Additional alternative button modules for PXE+ are available—please call to discuss options.
Accessories for the Pixie Display Control Module
The plug-and-play Internet gateway for your SmartPanel installation. Real-time control, security, and maintenance monitoring. Monitor every unit in your facility at a glance. No programming necessary!
A 5×1 audio switcher/volume control device. Allows the SmartPanel, Network Room Controller via a RS232 Control PUC, and Pixie+ via a RS232 Emitter to adjust volume and select from five stereo (unbal) inputs. Configurable gain and tone settings for each input. Plus a (bal) line ‘Mix’ input for mic preamp, etc. to (bal) output. One balanced line-level output. Includes a 4×1 composite or 2×1 S-video switcher. Also RS-232/485 controllable for stand-alone integration.
Mini-size input modules allow physical connection of devices to the projector. Available in a variety of connector-types. Patch video, VGA, et cetera through to the projector.
These unique products simplify and extend the cabling task of an AV installation.
FlexVGA 6′ – allows VGA connection in any situation where you have a tight fit (like a SmartDrawer).
SP2-AFVP-EXT – allows extending connection between the SmartPanel and the SP3-AFVP+ up to 50 feet with standard CAT5 cable (not included).
SP2-ETH-M100 – CAT5 jack for use with the escutcheon on the SmartPanel.
Replacement buttons or terminal block connectors for the Large and Small Chassis SmartPanel.
Stylish, durable surface-mount enclosures for the PixiePlus (PXE-DCM+), PixiePro (PX2-MP), and SmartPanel™ (SP2-SMCHAS).
In cases where you wish to use the SmartBox+ without control panel, order the SLB-SBOX+FACE to replace the standard face.
To make the patch points more evident, order the SLB-MINIFACE to replace the standard front plate.
Order a total of eight Mini Patch Modules to cover all of the openings.
When security is of the utmost importance, the SLB-SBOX+KEYLOCK kit can be ordered for the SmartBox+.
The SmartBox+ is an impressive mounting solution for the PixiePro Modular Panel (PX2-MP-IR), SP-TP7 touch panel, Small Chassis SmartPanel (SP2-SMCHAS) or PixiePlus Display Control Module (PXE-DCM+) and any switcher, DVD, or other media player. The SmartBox+ shelf folds down for user access. The folding deck provides a convenient place to rest a laptop or portable video source. The product includes mounting hardware for virtually every situation. You must specify four SLB-MINI modules for each SmartBox+.
Rack mount kits for the PixiePlus, PixiePro, Small and Large Chassis SmartPanels. The SP2-RACKSM-MOD has cut outs accommodating 4 Mini Input Module patch points, can also house the SP3-TCM+.